![]() Some non-Sony controllers will not work while in safe mode. You will have to use a USB wire with your controller in Safe Mode (even if it is a wireless controller). This rarely works but it is worth trying. Leave it unplugged untill the search completes. Right after pressing Start + Select to search for the update, unplug the controller. If you are sure everything is correct but the update still will not start, there is one trick to try. If it will not allow you to install directly from XMB, use Safe Mode (also called Recovery Mode). Use the right-hand USB slot (the one closest to the disc drive). Place the file under "UPDATE" and name it "PS3UPDAT.PUP". Under "PS3" folder, make a folder named "UPDATE". Most pups will come in an archive containing the pup as well as a file or folder containing the MD5, but I have also listed them here in case you only have the pup file itself. Your USB device must be formatted FAT32 with MBR (not GPT). Only plug in the USB device with the pup file (and your controller if it is wired). Remove any idps spoofs before checking for minver! They will cause wrong minver to be reported!ĭo not use USB hubs while installing firmware. ![]() Some users installing HFW over the same version of OFW have assumed that the update did not install properly because it did not add ".1" to version number or they expected it to show "4.87 HFW". If you install Rebug REX 4.84.2, it will report "4.84". For example, if you install HFW 4.87.1, it will report "4.87". "System Information" will only display one number followed by a dot and two more numbers. Do not install a downgrader pup without asking first! They will brick 3.56 minver consoles!Īlso note that the version number shown in "System Information" (under "System Settings") will not help determine if HFW or CFW is installed. If you want to use a lower firmware version after jailbreaking, be sure to read the 'Downgrading With QA Flag' tab when you get to it. Simply use bgtoolset to jailbreak, reboot and install the CFW pup that you actually want to use. Speaking of which, if you are jailbreaking a PS3 and installing a CFW, you do not need to downgrade to 3.55 as part of the jailbreak process. The only time I now advise to install firmware twice is after downgrading CFW. Any advice to install HFW twice (or OFW before HFW) is outdated. Please note that firmware usually only needs to be installed one time. Remember to turn off "Automatic Update" under "System Settings" to help prevent accidental updates. Thanks to Joonie, habib, zecoxao, and littlebalup for HFW! HFW is ONLY used with HEN! It is not a CFW! Some downloads will be pup files but others will be a zip or other archive with the pup file inside. Remove any idps spoofs before checking for minver with the minver checker PUP! Otherwise, the wrong minver may be reported! Some mod menus only work on DEX but I would look for a CEX menu before I considered converting to DEX. ![]() This is not recommend for the average user. Remember to turn off "Automatic Update" under "System Settings" to help prevent accidental updates.ĭEX pups (like Rebug D-REX) can only be installed after you have converted your PS3 to DEX.Please include the error code when asking for help. If you receive an error code, you can look it up here. Right after pressing Start + Select to search for the update, quickly unplug the controller. Only plug in the USB device with the pup file and your controller.Īlso remove any PS3 game discs from the drive! They contain firmware updates that may try to install instead of the USB update. Remove any firmware version spoofs before installing a pup! They can cause install to fail.ĭo not use USB hubs while installing firmware. If you are not sure if the PUP file is named correctly, you can right-click on it and open its properties. Windows may be hiding filename extentions.If it will not allow you to install directly from XMB, use Safe Mode (also called Recovery). Plug the USB device into the right-hand USB slot (the one closest to the disc drive). Place the PUP file under "UPDATE" and name it "PS3UPDAT.PUP". Under the "PS3" folder, make a folder named "UPDATE". Make a folder named "PS3" in the root of the USB device. This way you know the download was good AND that it copied to USB correctly. If you want to check the md5, check the file on the USB after copying. It will show up there if the PS3 recognizes it. To check if your PS3 is recognizing your device, goto the Video/Photo/Music columns. Your USB device must be formatted FAT32 with MBR (not GPT).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |